Traxxas 78086-4-GRN XRT Brushless Electric Race Truck Green
Couldn't load pickup availability
If you Like it SHARE it
Traxxas 78086-4-GRN XRT Brushless Electric Race Truck Green fuses race-inspired design and engineering with X-Maxx power and strength. The result is an all-new platform with sharp reflexes and unprecedented stability that is capable of exploiting the upper range of extreme 8s power and speed.
In The Box
- XRT brushless electric race truck in green
- TQi 2-channel transmitter and 5-channel receiver
- Installed VXL-8s ESC and Velineon 1200XL brushless motor
Needed to Complete
- Two compatible LiPo batteries (sold separately); two 4S packs for 8S operation
- Compatible LiPo balance charger
Key Features
VXL-8s Waterproof Electronic Speed Control
New aggressive tune for more power at any RPM
8s LiPo compatible
Integrated cooling fan
Real-time telemetry via Traxxas Link
3-LED status indicators
Machined heat sink
Powered accessory ports
10-gauge silicone wire
Integrated protection circuits
Velineon 1200XL Brushless Motor
4-pole 1275 kV
5 mm output shaft
Oversize aluminum heatsink for improved cooling
Dual cooling fans
Up to 60+ mph with Two 4s LiPo Batteries (sold separately)
Traxxas Stability Management
Improves straight line acceleration and braking on low-traction surfaces
Never dulls throttle or slows the truck
Adjusts from off to 100% assistance from the transmitter
TQi 2.4GHz High Output Radio System
TQi 2-channel transmitter
Traxxas Link enabled
2.4GHz 5-channel micro receiver (#6533) with fail-safe security and integrated telemetry ports
Automatically stores and loads settings for up to 30 Traxxas Link-enabled models, just switch on and drive, “model selection” is not required
Programmable Multi-Function knob
Adjustable steering and throttle percentage (dual rates)
Adjustable steering and throttle sensitivity (exponential)
X-Truck Drivetrain
Full-time shaft-driven 4-wheel drive
Heavy-duty steel CV driveshafts & axles
Splined aluminum center driveshaft
Machined aluminum stub axles
Transmission
Mod-1 pinion and spur gears
Fixed gear mesh system
Torque-Biasing Center Drive
X-Truck Differentials
Heavy-duty sealed 4-gear design
Large scale steel ring and pinion gears
Splined outdrives attached with external thru-bolt method
New bulkhead and covers increase bearing support
Rock-Solid Motor Mounting System
Precise preset gear mesh adjustments
4 keyed pins lock the motor in place
Motor retention separate from gear mesh
GTX Shocks
Machined aluminum threaded body
Extra-large bore and capacity
5.2 mm damper shaft
Lower seal cartridge includes integrated wiper seal combination
Height-adjustable spring retainer
Heavy-duty composite shock caps with pivot balls
Lower spring perches bolted on
WideMaxx Suspension
Performance-optimized geometry
Extra-wide suspension arms
Made from our strongest cold-weather material
Double-shear connections
High-strength steel suspension pins with retainers
4 mm machined pivot balls
Fixed high-strength camber and toe links
Heavy-duty steering blocks and axle carriers
Oversized wheel bearings
Steering
Powerful 365 oz-in steering servo
Heavy-duty cam-style servo saver
Dirt evacuation channels
Fully waterproof
Ultra-Low-CG Chassis Design
Modular chassis with interlocking bulkheads
Low center of gravity for improved handling; Flat bottom design; Heavy-duty interlocking skid plates; High-strength buttressing on shock towers
Dual snap-lock battery compartments
Protects batteries from side impacts; Allows secondary battery-clip security
Interlocking components for tight tolerances
Wire management for clean appearance
Patent-Pending Clipless Body
Snaps in place in just seconds
Secure body latches are easy to use
Clipless body mounting system
Rigid internal frame
Dual high-capacity cooling ducts
Molded body reinforcements for tear-through protection
Protective top skids
Rugged high-downforce rear wing
Heavy-duty Bumpers
Reinforced front bumper and rear wing support
Absorb impact forces while retaining shape
Heavy-duty front bumper and support
Reinforced rear wing support
Nerf bars for side impact resistance
Heavy-duty wheelie bar with carry handle
Wheels and Tires
7.4-inch Gravix race tires
Low sidewall for sharp turn-in response; Thick center carcass resists ballooning at high speed; Lower rotational mass for faster acceleration
3.8-inch matte black XRT wheels
High-strength glue and bead design
Huge 24 mm splined wheel hubs
Sealed Ball Bearings
Hex hardware with Rust-Resistant Black Oxide Coating
Specifications
| Manufacturer Model | 78086-4 |
| SKU | 78086-4-GRN |
| Color / Body Version | Green |
| Drivetrain | Shaft-driven 4-wheel drive |
| ESC | VXL-8s, 8S LiPo compatible |
| Motor | Velineon 1200XL, 4-pole 1275 kV brushless |
| Radio | TQi 2.4GHz, 2-channel transmitter |
| Receiver | 6533, 5-channel with fail-safe and telemetry ports |
| Tires | 7.4-inch Gravix |
| Wheels | 3.8-inch matte black XRT |
| Wheel hubs | 24 mm splined |