Traxxas 77036-4 X-Maxx 8S 4WD Monster Truck RTR No Body
Couldn't load pickup availability
If you Like it SHARE it
Traxxas 77036-4 X-Maxx 8S 4WD Monster Truck RTR No Body delivers extreme size, strength, and 50+ mph performance with two 4S LiPo batteries and the optional high-speed pinion installed. This version includes the complete X-Maxx chassis without a body shell, making it ideal for drivers who want to customize their build with their choice of body style. Body, batteries, and charger are sold separately.
In The Box
- X-Maxx MT Chassis with Traxxas Big Block brushless motor
- VXL-8s waterproof electronic speed control with integrated telemetry
- Optional high-speed pinion gear
- TQi 2.4 GHz radio system
- High-quality maintenance tools
- Belted chevron tires
Needed to Complete
- Body: Select your X-Maxx MT body from one of several available options.
- Batteries: X-Maxx MT requires LiPo batteries equipped with Traxxas High Current Connectors. Two Traxxas 4-cell, 6700 mAh Power Cell LiPo batteries with iD® are recommended for optimal performance (part 2890X).
- Charger: EZ-Peak Live Dual 4s LiPo Charger with iD®.
- Four AA alkaline batteries for the transmitter.
![]() |
![]() |
8S Brushless Power
Powered by the VXL-8s brushless system and running on dual 4S LiPo batteries, the X-Maxx is engineered for massive torque, brutal acceleration, and relentless durability. With self-righting technology, waterproof electronics, and a reinforced chassis design, this truck is built to handle the most punishing off-road terrain.
Model 77036-4: Fully assembled X-Maxx MT Chassis with TQiâ„¢ 2.4 GHz Radio System, VXL-8s Brushless Power System, and belted chevron tires. Requires MT body (sold separately).
Clipless Monster Truck Body Options
Choose from several clipless monster truck bodies, sold separately.
- Quick one-hand installation and removal
- Pivoting rear latch mechanism
- Eliminates body posts and clips
- Reinforced for extra protection
VXL-8s Waterproof Electronic Speed Control
- 8S LiPo compatible
- Built-in cooling fan
- Machined heat sinks
- 10-gauge silicone wire
- Integrated protection circuits
- LED status lights
Velineon 1200XL Brushless Motor
- 4-pole 1275 Kv
- 5 mm output shaft
- Aluminum slip-on heat sink
- Dual motor cooling fans
- 50+ mph with two 4S LiPo batteries and included optional pinion gear
Traxxas Stability Management
- Helps prevent spinouts and loss of control
- Adjusts from off to 100% assistance from the transmitter
TQi 2.4 GHz High Output Radio System
- Traxxas Linkâ„¢ enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity
- BEC Voltage and Motor Temperature Sensor installed
8S Driveline
- Steel pinion and spur gear
- Full-time shaft-driven 4-wheel drive
- Heavy-duty steel CV driveshafts
- Beefed-up steel differential output cups
- Splined aluminum center driveshaft
- Machined aluminum stub axles
- Torque-Biasing Center Driveâ„¢ absorbs shocks and distributes power to all four wheels
- 24 mm splined wheel hexes
- Sealed, silicone fluid-filled diffs with large module ring and pinion gears
Fixed Motor Mounting System
- Preset gear mesh adjustments
- No manual adjustments required
- Motor retention separate from gear mesh
Heavy-Duty Modular Composite Chassis
- Interlocking front and rear bulkheads
- Motor mounts to rear bulkhead to eliminate gear crunching flex
- Easy to service and access components
- Driveline is sealed in the chassis to keep out dirt and grit
Snap-Lock Battery Retention System
- No body clips or hook-and-loop straps
- Battery hold-downs pivot for easy access
- Adjustable for battery size
- More secure than conventional retention systems
- Integrated into chassis top brace for improved battery tray and chassis stiffness
Bumpers and Skid Plates
- Front energy-absorbing rubber impact cushion
- Lower front and rear skids for impact and abrasion resistance
- Integrated nerf bars for side impact resistance
Steering
- 2085XL high-output metal-gear steering servo with 450 oz-in torque and aluminum cooling fins
- Fully supported case mounting
- Double-shear, bearing-supported servo horn
Suspension
- Heavy-duty suspension arms with double-shear connections
- High-strength steel suspension pins used throughout
- Captured outer lower suspension pins with locknuts
- C-hub and steering block geometry maximizes steering angle
- Adjustable roll center
- Steel upper and lower tie bars
- Full-contact sealed bearings used in exposed locations
Aluminum GTX Shocks
- Machined aluminum threaded body
- Extra-large bore and capacity
- 5.2 mm damper shaft
- Lower seal cartridge includes integrated wiper seal combination
- Adjustable upper spring retainer
- Plastic shock caps with pivot balls
- Fixed shock locations
- Lower spring perches bolted on
Wheels and Tires
- Dual-profile white monster truck wheels with replica military-style axle hubs
- Huge 8.6-inch belted chevron-pattern monster truck tires
- Super-soft rubber compound for exceptional grip
- Internal belting virtually eliminates ballooning
Specifications
| Model | 77036-4 X-Maxx MT Chassis |
| Type | Monster truck, no body |
| Speed | 50+ mph with two 4S LiPo batteries, sold separately, and optional high-speed pinion installed |
| Manufacturer skill level | 6 |
| Manufacturer size designation | X-Truck |
| Vehicle weight | 19.1 pounds (8.66 kg) |
| Length | 30.67 inches (779 mm) |
| Width | 21.3 inches (540 mm) |
| Front track | 21.3 inches (540 mm) |
| Height | 13.99 inches (355 mm) |
| Wheelbase | 18.92 inches (480 mm) |
| Center ground clearance | 4.2 inches (107 mm) |
| Drive system / drivetrain | Shaft-driven 4WD |
| Transmission | Single speed |
| Differential type | Sealed, hardened steel bevel, limited slip |
| Gear pitch | 1.0 metric pitch |
| Servo | 2085XL metal-gear ultra-high-torque waterproof |
| Radio system | TQiâ„¢ 2.4 GHz 2-channel |
| Battery compartment | 197 × 52 × 44 mm |
Motor Specifications
| Motor name | Velineon 1200XL |
| Type | 1275 Kv sensorless brushless |
| Weight | 23.44 ounces (665 g) |
| Length | 4.32 inches (110 mm) |
| Diameter | 1.88 inches (48 mm) |
| Shaft size | 5 mm |
| Connector type | 6.5 mm bullet connectors |
ESC Specifications
| ESC name | Velineon VXL-8s |
| Type | Brushless |
| Case size | 2.23 inches (58 mm) / 2.83 inches (72 mm) / 1.81 inches (46 mm) |
| Weight | 7.60 ounces (215.5 g) |
| Motor connectors | 6.5 mm bullet connectors |
| Battery connectors | Traxxas High-Current Connectors |
| Power wire | 10-gauge Maxx® Cable |
![]() | |
![]() |



