| Description |
| Features |
- Perfect match for 3D park flyers weighing 20–30 oz (565–850 g)
- Ideal for scale park flyers 25–35 oz (710–990 g)
- Ideal for models requiring up to 250 watts of power
- High-torque, direct-drive alternative to inrunner brushless motors
- Includes mount, prop adapters and mounting hardware
- External rotor design, 4mm shaft can easily be reversed for alternative motor installations
- Slotted 12-pole outrunner design
- Quiet, lightweight operation
- High-quality construction with ball bearings and hardened steel shaft
| Specifications |
| Speed Control: | 20–35A brushless |
| Bearings or Bushings: | One 4 x 9 x 4mm Bearing and One 4 x 10 x 4mm Bearing |
| Cells: | 6–10 Ni-Cd/Ni-MH or 2–3S Li-Po |
| Idle Current (Io): | .85A @8V |
| Motor Design: | Outrunner |
| Overall Diameter: | 35mm (1.40 in) |
| RPM/Volt (Kv): | 910 |
| Recommended Prop Range: | 10x7 to 12x6 |
| Resistance (Ri): | .08 ohms |
| Shaft Diameter: | 4mm (.16 in) |
| Size: | Park flyer |
| Voltage: | 7.2–12 |
| Wire Gauge: | 16 AWG |
| Needed to Complete |
- 20A–35A brushless ESC
- 2S–3S Li-Po or 6- to 10-cell Ni-MH/Ni-CD
- 10x7–12x6 propeller