{"product_id":"stage-d10-ford-mustang-gt-rtr-2","title":"HPI Stage-D10 Ford Mustang GT RTR S650 - B.Hobson","description":"\u003cp\u003e\u003cstrong\u003eHPI HPI161008 Stage-D10 Ford Mustang RTR Spec 5-FD B. Hobson\u003c\/strong\u003e is a preassembled 1\/10-scale rear-wheel-drive drift car with a painted Ben Hobson Ford Mustang body and 2.4GHz radio system.\u003c\/p\u003e\n\u003ch2\u003eIn the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePreassembled Stage-D10 with painted Ford Mustang RTR Spec 5-FD Ben Hobson body\u003c\/li\u003e\n\u003cli\u003eTF-51 four-channel transmitter and RF-51 receiver with LED adaptor\u003c\/li\u003e\n\u003cli\u003e20T brushed 540 motor and SC-3SWP2 60A ESC\u003c\/li\u003e\n\u003cli\u003eSD-07WR servo and D-Box3 Lite drift gyro\u003c\/li\u003e\n\u003cli\u003eFull LED light system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNeeded to Complete\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFour AA transmitter batteries\u003c\/li\u003e\n\u003cli\u003e2S LiPo battery with XT-60 connector\u003c\/li\u003e\n\u003cli\u003eCompatible LiPo battery charger and LiPo charge case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDrive battery and charger are not included.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePurpose-built rear-wheel-drive drift chassis\u003c\/li\u003e\n\u003cli\u003eAdjustable Ackermann steering, suspension geometry and motor positions\u003c\/li\u003e\n\u003cli\u003eMagnetic body mounting and replica Aero 5 wheels\u003c\/li\u003e\n\u003cli\u003eTransmitter-adjustable gyro gain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eStage-D10 -\u003cbr\u003eThe next generation of\u003cbr\u003eHPI Racing drift!\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eStage-D10\u003c\/strong\u003e is HPI Racing's all-new, purpose-built \u003cstrong\u003e1\/10th scale rear-wheel-drive drift platform\u003c\/strong\u003e, combining a great Ready-To-Run setup with the huge range of tuning possibilities demanded by today's RC drifters.\u003c\/p\u003e\n\u003cp\u003eDeveloped from the ground up over three years, the \u003cstrong\u003eStage-D10\u003c\/strong\u003e has been tested across multiple surfaces, by drivers ranging from RWD newcomers to experienced RC drifters. That testing helped us refine the chassis, add new features and develop a factory setup that delivers great all-around performance straight out of the box.\u003c\/p\u003e\n\u003cp\u003eUnderneath, there's a serious amount of adjustment waiting to be explored.\u003c\/p\u003e\n\u003cp\u003eAnd because this is HPI, the first \u003cstrong\u003eStage-D10 RTR\u003c\/strong\u003e cars come topped with stunning officially licensed \u003cstrong\u003e2024 Ford Mustang RTR Spec 5-FD\u003c\/strong\u003e bodies, complete with authentic Formula Drift liveries, molded scale details, replica wheels and a full LED light system.\u003c\/p\u003e\n\u003cp\u003eNew to RWD drifting? The \u003cstrong\u003eStage-D10\u003c\/strong\u003e will give you the confidence to get it on the track and start driving.\u003c\/p\u003e\n\u003cp\u003eAlready know your way around a drift chassis? The \u003cstrong\u003eStage-D10\u003c\/strong\u003e has the base for almost any setup you want straight from the box, with no extra parts required. So start adjusting.....\u003c\/p\u003e\n\u003cp\u003e     \u003c\/p\u003e\n\u003ch2\u003eHPI has a long history of producing detailed replicas of some incredible full-size drift cars, and the Stage-D10 release continues that tradition with the \u003cstrong\u003eFord Mustang RTR Spec 5-FD\u003c\/strong\u003e.\u003c\/h2\u003e\n\u003cp\u003eStraight from the RTR Vehicles garage and Formula Drift paddock, three officially licensed versions recreate the cars of:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVaughn Gittin Jr.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eJames Deane\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBen Hobson\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach version gets its own authentic livery, with a fully factory-finished and assembled \u003cstrong\u003e5-piece polycarbonate body\u003c\/strong\u003e, plus additional molded parts for the mirrors, vents, grilles and light buckets\u003cbr\u003e\u003cbr\u003eEach Stage-D10 comes with detailed instructions showing exactly how to set up the body mounting system for the pre-finished Mustang shell, making installation quick and hassle-free. Best of all, \u003cstrong\u003eno body posts stick through that Mustang shell!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eAERO 5 REPLICA WHEELS\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eStage-D10 RTR\u003c\/strong\u003e cars come fitted with \u003cstrong\u003eRTR\u003c\/strong\u003e \u003cstrong\u003eAero 5 replica wheels\u003c\/strong\u003e, colour-matched to each livery and completing the look of the full-size RTR Mustangs.\u003c\/p\u003e\n\u003cp\u003eThe front wheels feature a \u003cstrong\u003e3mm offset\u003c\/strong\u003e, with \u003cstrong\u003e6mm offset rears\u003c\/strong\u003e giving the Mustang its aggressive drift stance. Wrapped around them are HPI's \u003cstrong\u003eNEW Harder HDPE T-Drift compound tires\u003c\/strong\u003e, developed specifically for the Stage-D10.\u003c\/p\u003e\n\u003cp\u003eAt the rear you'll also find \u003cstrong\u003eremovable aerodiscs\u003c\/strong\u003e, another scale detail taken straight from the full-size drift cars. Run them for the full RTR look, or pop them off when you fancy a change.\u003c\/p\u003e\n\u003ch2\u003eLIGHT UP THE TRACK\u003c\/h2\u003e\n\u003cp\u003eEvery Stage-D10 Ford Mustang RTR Spec 5-FD comes with a full LED light system controlled directly from the HPI TF-51 Transmitter.\u003c\/p\u003e\n\u003cp\u003eThat means \u003cstrong\u003eheadlights, upper grille intake lights, tail lights and brake lights\u003c\/strong\u003e are all fitted and ready to go.\u003cbr\u003e\u003cbr\u003eThe CH3 button on the Transmitter gives you 3 modes to choose from: On or Off or Daylight running.  \u003c\/p\u003e\n\u003cp\u003eJust like the full-size Mustang, each car gets distinctive grille lighting to match its personality.\u003c\/p\u003e\n\u003cp\u003eDay or night, you're going to know which Mustang is coming towards you.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePURPOSE-BUILT FOR 2WD RWD DRIFTING\u003c\/h2\u003e\n\u003cp\u003eThe Stage-D10 is a chassis design built specifically for modern RC drifting.\u003c\/p\u003e\n\u003cp\u003eThe factory setup gives you a capable starting point without needing to understand every adjustment before your first run. As your driving develops, there's a huge range of setup changes available to fine-tune how the car behaves.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eREADY TO DRIFT\u003c\/h2\u003e\n\u003cp\u003eAdjustable camber links and toe block options combine with multiple front and rear roll centre and camber gain positions. Wheel hex spacing can be increased by 1mm or 2mm, while wishbone placement allows the wheelbase to be adjusted from \u003cstrong\u003e246mm to 264mm\u003c\/strong\u003e.\u003cbr\u003eThe steering system features fully adjustable Ackermann geometry, with forward, backward, up and down adjustment. There are also four servo mounting positions, giving you even more scope to change the steering setup.\u003c\/p\u003e\n\u003cp\u003eShorty battery packs can be mounted in mid or rear positions, allowing you to experiment with weight distribution and find the balance that suits your driving.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Stage-D10 is built to be enjoyed at every level.\u003cbr\u003eIf you're new to RWD drifting, the factory setup gives you a great place to start. Get some track time, build your confidence and learn what the car can do. Then start experimenting.\u003c\/p\u003e\n\u003cp\u003eMove the battery. Change the gearbox position. Try a different steering setup. Adjust the suspension. Change the wheelbase.\u003cbr\u003eFor experienced drifters, all of those options are there from the start.\u003c\/p\u003e\n\u003cp\u003eHowever you choose to set it up, there's one thing left to do....\u003cstrong\u003eget sideways!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eRotating Front and Rear disc brakes with a clever twist\u003c\/h2\u003e\n\u003cp\u003eTake a closer look behind the RTR Aero 5 wheels and you'll spot another neat scale detail. The Stage-D10 features \u003cstrong\u003ehex adaptor brake discs front and rear that rotate with the wheels\u003c\/strong\u003e. The scale brake calipers also have adjustment built in for fine-tuning their position depending on your wheel setup, or you can remove them completely!\u003c\/p\u003e\n\u003cp\u003eBut there's a clever twist! The brake disc design also forms part\u003cbr\u003eof the \u003cstrong\u003ewheel hex spacing system\u003c\/strong\u003e, allowing you to adjust the wheel\u003cbr\u003eoffset by an additional \u003cstrong\u003e1mm or 2mm using simple click-in spacers\u003c\/strong\u003e, making track width changes quick and easy.\u003c\/p\u003e\n\u003ch2\u003eFLEXIBLE ESC MOUNTING \u0026amp; REAR DIFFUSER\u003c\/h2\u003e\n\u003cp\u003eIn the standard Stage-D10 setup, the ESC sits low behind the rear shock tower on the \u003cstrong\u003eadjustable ESC mounting plate\u003c\/strong\u003e, keeping the electronics neat and the weight low in the chassis. A wiring guide across the top of the shock tower keeps your ESC wiring exactly where it needs to be.\u003c\/p\u003e\n\u003cp\u003ePlanning to experiment with a rear motor configuration? The ESC can be moved forward of the rear shock tower and mounted on the \u003cstrong\u003erear top plate\u003c\/strong\u003e, freeing up the space needed to explore different motor and gearbox positions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA diffuser element designed to smooth airflow under the car for improved aero efficiency\u003c\/strong\u003e. An easy-access rear mounting point also opens up plenty of possibilities for \u003cstrong\u003efuture scale detailing options\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eOVER 100 MOTOR POSITIONS!\u003c\/h2\u003e\n\u003cp\u003eThe rear gearbox is where things get really interesting.\u003c\/p\u003e\n\u003cp\u003eThe Stage-D10 gives you \u003cstrong\u003emore than 100 possible motor positions\u003c\/strong\u003e, allowing major changes to the position of the motor and the weight distribution at the rear of the chassis.\u003c\/p\u003e\n\u003cp\u003eThe transmission can also be configured with \u003cstrong\u003e3 or 4 gears\u003c\/strong\u003e, (Parts included) with the ability to also change the motor direction. Combine the gearbox configurations with all those motor positions and there are more than \u003cstrong\u003e200 possible options\u003c\/strong\u003e to experiment with.\u003c\/p\u003e\n\u003cp\u003eThe drivetrain uses a \u003cstrong\u003e2.6 internal FDR\u003c\/strong\u003e and a sealed composite geared rear differential.\u003c\/p\u003e\n\u003cp\u003eMove it. Change it. Try it.\u003c\/p\u003e\n\u003cp\u003eThat's what the Stage-D10 is all about.\u003c\/p\u003e\n\u003cp\u003e   \u003c\/p\u003e\n\u003ch2\u003eSTAGE-D10 BRUSHED RTR\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e20T brushed 540 motor and 60A ESC\u003c\/strong\u003e make the standard Stage-D10 a great-value way to get into RWD drifting. The smooth, manageable power delivery is easy to get to grips with, giving new drivers plenty of usable performance without adding unnecessary complexity or cost.\u003c\/p\u003e\n\u003cp\u003eAnd don't mistake Brushed for basic! There's more than enough power to get the Stage-D10 sideways and start learning the throttle control, transitions and techniques that make RWD drifting so much fun.\u003c\/p\u003e\n\u003ch2\u003eNEW D BOX Lite\u003c\/h2\u003e\n\u003cp\u003eSteering assistance comes from the \u003cstrong\u003eD-Box3 Lite drift gyro\u003c\/strong\u003e, with EPA and gain adjustment. Gyro gain can be controlled directly from Channel 4 on the TF-51 transmitter.\u003c\/p\u003e\n\u003ch2\u003eTHE STANDARD FOR RTR RADIOS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4th Channel - 100 position digital slider\u003c\/li\u003e\n\u003cli\u003eSteering Exponential\u003c\/li\u003e\n\u003cli\u003eDrop-down steering position for a natural control position\u003c\/li\u003e\n\u003cli\u003eFoam-covered wheel for extra comfort and grip\u003c\/li\u003e\n\u003cli\u003eLeftie friendly! Swappable steering wheel design\u003c\/li\u003e\n\u003cli\u003eRubber finger and thumb handle grips\u003c\/li\u003e\n\u003cli\u003eRubber bumpers on all corners for the highest protection\u003c\/li\u003e\n\u003cli\u003eMagnetic area for body clips or screws while you work!\u003c\/li\u003e\n\u003cli\u003eDigital on and off switch\u003c\/li\u003e\n\u003cli\u003eAudible warnings for low power and idle time!\u003c\/li\u003e\n\u003cli\u003eServo Reverse, EPA, Trims and Dual Rate switches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe RF-51 receiver features a waterproof silicone inner jacket for use in any weather. A built-in failsafe is also a major feature. The RF-51 uses the HPI 4-way LED Adaptor (160560) via a dedicated LED Channel to control headlights and taillights with the on-board LED Light controller!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eA DRIFT CHASSIS BUILT FOR PROGRESSION\u003c\/h2\u003e\n\u003cp\u003eThe Stage-D10 has been designed to give you a great starting point, without limiting where you can take it next.\u003c\/p\u003e\n\u003cp\u003eAs your driving progresses, so can the chassis. Start experimenting with \u003cstrong\u003ecamber, toe, track width and suspension geometry\u003c\/strong\u003e, then dig deeper into battery placement, Ackermann, servo position and the huge range of motor and gearbox configurations.\u003c\/p\u003e\n\u003cp\u003eYou can get straight into the setup and start making the Stage-D10 your own, with many of the tuning options built into the standard chassis and no need for a long list of option parts. \u003cstrong\u003eUnless, of course, you want to!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Stage-D10 front suspension gives you plenty of control over how the front end reacts through a drift. \u003cstrong\u003eAdjustable camber links, steering links, multiple roll centre and camber gain positions\u003c\/strong\u003e allow you to fine-tune the geometry, while the threaded oil-filled coilover shocks make ride height and spring preload changes quick and easy. There are Machanical stops included in the spare parts bag if you really want to take to extremes.\u003c\/p\u003e\n\u003cp\u003eAdjustable toe block options give you further control over the front suspension setup, with \u003cstrong\u003e1mm or 2mm wheel hex spacing\u003c\/strong\u003e providing a quick way to fine-tune the track width.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFULLY ADJUSTABLE ACKERMANN\u003c\/h2\u003e\n\u003cp\u003eSteering setup is a huge part of getting a RWD drift chassis to behave exactly how you want, so the Stage-D10 gives you plenty of room to experiment.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAckermann geometry can be adjusted forward and backward, as well as up and down\u003c\/strong\u003e, allowing you to change the steering geometry and tune how the front wheels work together through different steering angles.\u003c\/p\u003e\n\u003cp\u003e     \u003c\/p\u003e\n\u003ch2\u003eFULLY ADJUSTABLE FRONT SUSPENSION\u003c\/h2\u003e\n\u003cp\u003eThe Stage-D10 front suspension gives you plenty of control over how the front end reacts through a drift. \u003cstrong\u003eAdjustable camber links, steering links, multiple roll centre and camber gain positions\u003c\/strong\u003e allow you to fine-tune the geometry, while the threaded oil-filled coilover shocks make ride height and spring preload changes quick and easy.\u003c\/p\u003e\n\u003cp\u003eAdjustable toe block options give you further control over the front suspension setup, with \u003cstrong\u003e1mm or 2mm wheel hex spacing\u003c\/strong\u003e providing a quick way to fine-tune the track width.\u003c\/p\u003e\n\u003cp\u003eThere are also mounting points ready for an \u003cstrong\u003eoptional front sway bar\u003c\/strong\u003e, giving you another tuning option as you dig deeper into the Stage-D10 setup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTUNE THE REAR FOR YOUR DRIVING STYLE\u003c\/h2\u003e\n\u003cp\u003eAt the rear, the focus moves to finding the balance and traction that suits your driving style. \u003cstrong\u003eAdjustable camber links, toe block options and multiple roll centre and camber gain positions\u003c\/strong\u003e give you plenty to work with, backed up by the same threaded oil-filled coilover shocks but with a slight longer +2mm ball link and stiffer spring than the front. \u003cbr\u003eIncluded with the car are optional pistons and shock ball link lengths for the shocks.\u003c\/p\u003e\n\u003cp\u003eThe rear suspension also works around one of the Stage-D10's biggest tuning features. With the \u003cstrong\u003egearbox and motor position able to move through a huge range of locations\u003c\/strong\u003e, plus mid or rear battery placement, you can make significant changes to rear weight distribution and then use the suspension geometry to fine-tune the resulting chassis behaviour.\u003c\/p\u003e\n\u003cp\u003eMounting points for an \u003cstrong\u003eoptional rear sway bar\u003c\/strong\u003e are already built into the chassis, giving experienced tuners another option for controlling rear roll and response.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eMAGNETIC BODY MOUNTING\u003c\/h2\u003e\n\u003cp\u003eThe Stage-D10 uses HPI's new magnetic drift body mounting system. Powerful \u003cstrong\u003eN52-grade magnets\u003c\/strong\u003e and 10mm steel balls hold the body securely in place without putting mounting holes through the top of the shell.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e3x10mm N52 magnets\u003c\/strong\u003e are held in a composite surround designed to locate perfectly over the 10mm steel ball. This makes lining up and fitting the body super easy, while giving the magnet extra support for those inevitable barrier bumps and door taps.\u003c\/p\u003e\n\u003cp\u003eGot an older or aftermarket shell with body holes already in place? No worries! We've also included a \u003cstrong\u003econical screw-lock system with scale Aerocatch detailing\u003c\/strong\u003e to secure the magnets through existing body holes. Instead of an unwanted hole, you get a neat scale detail inspired by the hardware found on full-size cars.\u003cbr\u003e\u003cbr\u003eBoth of these systems will be available in a universal magnet mount set! \u003c\/p\u003e\n\u003cp\u003ePrefer traditional body posts, or planning to fit another shell? We've included those too.\u003c\/p\u003e\n\u003cp\u003eThe chassis has multiple conventional body mounting positions, with different post options to suit a wide range of bodyshells.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eMetal-Shielded Ball Bearings\u003c\/h2\u003e\n\u003cp\u003eThe Stage-D10 is fully fitted with a set of metal-shielded ball bearings for maximum efficiency. The metal shields keep the dust away from the internals while the smooth precision bearings provides for optimum power delivery from the power source out into the driveline.\u003c\/p\u003e\n\u003ch2\u003eBody Choices\u003c\/h2\u003e\n\u003cp\u003eYou can fit any 1\/10th scale touring car body from HPI Racing onto the Stage-D10 from hot hatches to supercars, pick-up trucks to supertouring racers. All you need to do is adjust the body mounts front and rear and fit your prefered offset of wheels. The chassis is already setup at 255mm, which is perfect for the majority of the HPI Racing bodyshells.\u003cbr\u003e\u003cbr\u003eGot an aftermarket shell with a different wheelbase? A simple system of spacers allows you to adjust the wheelbase from 246 to 264mm.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer part number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e161008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScale\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2WD rear-wheel drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e460 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheelbase\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e255 mm; adjustable 246–264 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20T brushed 540\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eESC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSC-3SWP2 60A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery requirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2S LiPo with XT-60 connector, not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRadio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTF-51 2.4GHz four-channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately 96 oz estimated shipping weight; verify packed weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.hrpdealer.com\/pdf\/manuals\/hpid10_m.pdf\" target=\"\"\u003e\u003cimg src=\"https:\/\/www.hrpdealer.com\/images\/icons\/pdf.png\"\u003eProduct Manual\u003c\/a\u003e\u003ca href=\"https:\/\/www.hrpdealer.com\/pdf\/manuals\/hpid10_e.pdf\" target=\"\"\u003e\u003cimg src=\"https:\/\/www.hrpdealer.com\/images\/icons\/pdf.png\"\u003eExploded View\u003c\/a\u003e\u003ca href=\"https:\/\/www.hrpdealer.com\/pdf\/manuals\/hpid10_qs.pdf\" target=\"\"\u003e\u003cimg src=\"https:\/\/www.hrpdealer.com\/images\/icons\/pdf.png\"\u003eQuick Start Guide\u003c\/a\u003e\u003ca href=\"https:\/\/www.hrpdealer.com\/pdf\/manuals\/hpid10_tm.pdf\" target=\"\"\u003e\u003cimg src=\"https:\/\/www.hrpdealer.com\/images\/icons\/pdf.png\"\u003eTransmitter Manual\u003c\/a\u003e\u003ca href=\"https:\/\/www.hrpdealer.com\/pdf\/manuals\/hpi161009_bm.pdf\" target=\"\"\u003e\u003cimg src=\"https:\/\/www.hrpdealer.com\/images\/icons\/pdf.png\"\u003eBody Manual\u003c\/a\u003e\u003ca href=\"https:\/\/www.hrpdealer.com\/pdf\/manuals\/hpid10_gm.pdf\" target=\"\"\u003e\u003cimg src=\"https:\/\/www.hrpdealer.com\/images\/icons\/pdf.png\"\u003eGyro Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"HRP Distributing","offers":[{"title":"Default Title","offer_id":53621436514615,"sku":"HPI161008","price":324.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2349\/files\/hpi161008.jpg?v=1794596818","url":"https:\/\/superstitionhobbies.com\/products\/stage-d10-ford-mustang-gt-rtr-2","provider":"Superstition Hobbies","version":"1.0","type":"link"}