DR10 Drag Race Car RTR

Associated RC

$ 339.99 $ 499.99
SKU: ASC70025

Sorry, this item is out of stock

1/10 DR10 2WD Drag Race Car Brushless RTR

Street Racing - An unsanctioned form of auto racing which occurs on public roads. Racing in the streets is centuries old and started well before the automobile, but auto racing started the moment the second vehicle was created!


  • Based on the 9-time R.O.A.R. National Champion short-course race truck platform
  • 2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
  • Three-position wheelie bar with optional large wheels
  • High-torque, metal-gear Reedy servo with spring style servo saver
  • Powerful Reedy 3300kV brushless motor
  • Reedy 3300kV brushless motor
  • Lightweight front drag tires
  • Durable and lightweight aluminum top shaft
  • Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3S LiPo battery packs
  • Metric hardware throughout
  • 18 precision, rubber-sealed ball bearings
  • Durable front and rear wide body mounts
  • 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
  • Adjustable suspension geometry
  • Vertical ball ends for roll center adjustments, front and rear
  • Many Factory Team options already available!


Modern street racing's roots go back to Woodward Avenue, Michigan in the 1960s when the three main Detroit-based American car companies were producing high-powered performance cars. A private racing venue was not always available, and therefore the race would be held illegally on public roads.

The DR10 Drag Race Car is based on the 9-time R.O.A.R. Short Course National Championship winning trucks. The DR10 features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as our ALL NEW DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box.

Needed to Complete
  • Four (4) AA batteries (#ASC302 Reedy AA Alkaline) used in the transmitter
  • NiMH or LiPo battery with High Current T-Plug (#ASC724 Reedy 7-cell WolfPack or #ASC751 Reedy WolfPack LiPo)
  • Charger for battery used (#ASC27201 Reedy balance Charger - good for LiPo, LiFe)
What's in the Box?
  • (1) DR10 Drag Race Car RTR
  • (1) 2.4GHz 2-channel radio
  • (1) High-torque, metal-gear Reedy servo
  • (1) Reedy Brushless Speed Control
  • (1) Product Manual


Factory-finished Body

Factory-finished two-piece Reakt drag race body with rear spoiler


Reedy Speed Control

Water-resistant high-power Reedy brushless speed control with T-plug connector


Coil-over Shocks

Aluminum 12mm big bore coil-over shock absorbers


Wheelie Bar

Three-position wheelie bar with optional large wheels



Rugged steel turnbuckles for adjustable camber and front toe-in


Receiver Box

Water-resistant enclosed receiver box


CVA Driveshafts

Rear CVA driveshafts for more reliability


Drag Race-inspired Wheels

Lightweight drag race-inspired wheels with high-grip rear drag slick tires



Approximate Assembly Time No assembly required
Ball Bearings 18 precision, rubber-sealed ball bearings
Batteries 2S-3S LiPo (sold separately)
Battery Dimensions L, W, H: 5.5 x 1.8 x 0.96" (139 x 47 x 24.5mm)
Charger Sold Separately
Chassis Low center-of-gravity molded composite
Completion Level Ready-To-Run
Drivetrain 2WD
Internal Gear Ratio 2.6:1
Length 24" (609.6mm)
Motor Type 3300kV brushless motor, Brushless
Radio Included
Scale 1/10
Servos High-torque, metal-gear Reedy servo with spring style servo saver
Shock Type Aluminum 12mm big bore coil-over
Suspension Adjustable suspension geometry
Tire Tread Slick
Vehicle Type Drag Racing Car, Dragster
Water-Resistant Yes
Weight 1850g (4.08lbs)
Wheelbase 12.68" (322mm)
Width 10.7" (272mm)

Our brands